Desert Eagle Powerwash - Arizona » Clean

Using a Portable Carpet Cleaning Machine Can Help you Clean Hard to Get to Spots

Seth — Wed, 22 Jul 2009 17:18:10 +0000

The question you need to ask is what is the best way to really clean carpets at home and which is the best home carpet steam cleaner. One thing that immediately strikes you is that the home carpet steam cleaning equipment takes up a whole lot of storage space, and rentals are cumbersome.
Before deciding upon a home carpet steam cleaner, you should consider how it will perform on carpets and upholstery, convenience of operation, running time as well as its features. Home carpet steam cleaners such as Hoover and Electrolux are middle of the road types and do not score very highly according to experts.
However, the Hoover V2 is easy to use and takes smaller amounts of time to clean than other machines do. The Hoover Steam Vac V2 is also impressive in that it can suck out huge quantities of dirt from the carpet. This is the best choice in deep cleaning vacuum and has a broad cleaning path that spans 14 inches and also has an auto rinse feature.
It can spray as well as brush with detergent solution when it is pushed and automatically rinses when the motion is reversed. The result is that it will leave the carpet drier so one does not have to wait too long before walking on the carpet, again.
Other Options To Look For
Other home carpet steam cleaners that stand out are Bissell 7920 Proheat Protech and the Dirt Devil 4200WP. The Bissell SpotLifter is a small portable carpet cleaner though some say that it is not very durable. It is cheaper and can be used in the car or on the stairs. No matter what, the idea is to keep the air clean and this means a healthier and better way of living and a portable home carpet steam cleaner would effect just such a situation by destroying the impurities and allergens like the dust mites and help to freshen up the air in the house.
The home carpet steam cleaner will help sanitize each and every part of the house since steam cleaners are able to easily handle very hard to clean spots and are also lightweight and easy to use. One should use a portable home carpet steam cleaner that does not use chemicals and thus ensure that the environment is kept clean and safe.

For more information on carpet cleaning from Matthew Meyer see the carpet cleaning section of TheFreeAdForum. com directory at:http://www. quickregister. net/infowizards/CAT/Carpet-Cleaning_80_1. html

For a Deeper Clean, Try Vapor Steam!

Seth — Sat, 18 Jul 2009 05:17:32 +0000

Steam cleaners look a lot like vacuums, but they use the natural power of steam to accomplish a multitude of domestic cleaning tasks. Vapor steam cleaning sanitizes, deep cleans and deodorizes. You can clean hard surfaces, like countertops, or softer surfaces, like upholstery with a steam cleaner. When you use a steam cleaner there is no need for additives or chemicals. Steam cleaners are useful for hygienically cleaning surfaces and floors around the home, car interiors and garden furniture. Steam cleaners are even useful for wallpaper stripping.

The way steam cleaners work is that they take regular tap water and transform it into fine, dry, high-pressured steam that is heated to two-hundred forty to two hundred sixty degrees Fahrenheit. This means that you probably shouldn’t use a steam cleaner on heat sensitive materials. The steam in the steam cleaner is used to dislodge and dissolve the dirt and grease on the surface. Steam cleaners loosen the dirt in carpet fibers. The dirt rises to the surface where it is absorbed by a towel affixed to an attachment on the steam cleaner.

Harmful germs and 98% of dust mites are killed with the use of steam cleaners. Dry steam penetrates the pores of any material being cleaned and kills dust mites, viruses, molds and fungi. This means that steam cleaners reduce allergens while being kind to the environment. You’ll immediately notice a freshness of the air in your home after using a steam cleaner.

Steam cleaners heat up in minutes and most provide thirty minutes of continuous steam. Less than a gallon of tap water is used in an hour’s worth of cleaning with a steam cleaner. Low moisture vapor is used which means that a steam cleaner will leave virtually no damp residue on the surface that has been cleaned. Some come with a shoulder strap and a detachable steam unit so that the unit is more portable. These features of a steam cleaner make the cleaning of hard to reach areas easier.

Steam cleaning, it’s just right for deep and ecologically friendly cleaning.

Erin Lynn is a marketing writer for Vacuum Home with vast expertise in steam cleaners.

Hiring A Power Washer To Clean The Outside Of Your Home

Seth — Tue, 07 Jul 2009 05:41:23 +0000

If you are looking for a quick and thorough way to clean your house’s exterior, consider pressure washing. Pressure washing is best left in the hands of a professional. However, a pressure washing job done incorrectly or by an unqalified pressure washing contractor can cause damage to your home or property. The damage can be costly. Outlined below are ideas to guide you in your search for a quality pressure washing contractor. Additional advice is provided as well on how to deal with the contractor of your choice when the cleaning work is in progress, and when it is completed. 1. Equip yourself with a clear understanding of the risks involved in pressure washing and how to minimize these risks. Taking the time to educate yourself thus will enable you to distinguish between the mediocre outworker from the quality contractor. 2. Arrange to meet the contractor in such a way that they evaluate the site to be worked on together with you. Establishing clear communications at this point will help limit the possibility of errors in the estimating process. 3. Consult. A sound pressure washing contractor will welcome the opportunity to examine your site, ask questions and note any potential areas of concern. These contractors will pay attention to your needs and decide what type of service you need and expect. In addition, they will also go over with you the advantages and limitations of the service that they provide. As you meet with different contractors, be sure to question them on the specifications of the service, exact procedures, outcome and potential for damage. You will then be able to get a clearer picture of the service and decide which contractor to award the job. 4. Request for an outline of the cleaning procedure. This summary of work steps that may come with the estimate or as a separate sheet should prove to be a helpful tool for comparing the different pressure washing services you consult with. 5. Question Equipment Status. Does the pressure washing contractor own the equipment or are they rented? Contractors that either own or lease their equipment are typically more reliable and committed to their pressure washing business. Contractors who rent equipment may be an indication that they are not as reliable. Most pressure washers that are for real will be outfitted with apparatus that have at least the following specifications: -11 to 15 horsepower (HP) -3000-4000 pounds per square inch (PSI) of pressure, and -three to six gallons per minute (GPM) of water flow. A rating of 2000 PSI and two GPM is residential-, rather than industrial-grade equipment. 6. Ask providers to give you a demonstration. Not many providers will accede to this request, as it often requires much time and effort to undertake. It does not mean you should never ask, though. Often, the provider will respond by asking the client to be there during setup instead. During this time, do not think twice to inform the contractor of any qualms you may have about the work to be performed. 7. See that the estimates are formalized in writing. This record should protect both you and the service provider you are hiring. A written estimate provides clarity to the desired service, details expected results, and itemizes cost of labor and materials. 8. Obtain References. Obtaining references is important. Make sure that referrals are for pressure washing projects and not for other contracted services such as deck cleaning or vinyl siding cleaning. Make sure to use the references once the contractor has provided them to you. Ask questions in regards to the quality of the work such as project outcomes, workmanship and professionalism. 9. Guarantee and Financing Policies. Read over the financing or billing policies and customer guarantee or satisfaction papers. Make sure that you understand policies in regards to payment schedules and deposits. What type of satisfaction and guarantee does the contractor offer on the finished project? 10. Coverage. Make certain that the contractor has liability coverage. Professional pressure washing contractors will have coverage for their customers and themselves. Liability insurance should cover potential on-site mishaps, injury or property damage. 11. On-Site Inspection. During the pressure washing project, be present on-site to inspect the work and keep an eye on the work being done. You should be available to talk with the contractor should any problems arise. To sum up: Educate yourself about pressure washing and how it is done. Ask questions and get references for each pressure washing contractor. Do a thorough cost comparison of the project, materials and labor and use commonsense. Eliminate potentially poor quality pressure washing contractors. A qualified professional will be more than happy to help you through the entire selection process and provide you with the necessary information you need to make an informed decision.

David Lee is an expert in home improvement. See his site for Atlanta pressure washing and also Atlanta roof cleaning

Clean Your Homes Siding With A Pressure Washer

Seth — Mon, 06 Jul 2009 05:12:32 +0000

Pressure washing which is also referred to as power washing is the best way to clean your house of mold and mildew. It is also a must to prep your home for painting and other projects. Basically pressure washing a house’s exterior will clean dirt and build up from the atmosphere off your siding material. One thing to be careful about is when pressure washing a house is not the same as a drive way. Only low pressure (around 300 psi) should be used. A high pressure spray will damage the siding material. Your first question to a pressure washing contractor should be ‘what pressure do you clean with’. If they use high pressure (more than 300 psi), drop them like a hot potato! If you will be doing the job yourself, be sure your pressure washing unit has a house wash tip with it. If you plan on getting a new coat of paint on your house, it is essential to get the house washed. This will create a clean foundation for the paint to adhere to. Pressure washing a house is safe for almost all siding products like metal, vinyl, brick and hardy plank. Again this only applied to low pressure techniques. High pressure on brick and mortar will most likely damage it. Vinyl siding is also easily damaged if care is not taken. If your house has wood siding then low pressure cleaning will also keep it looking good. To clean the house a mixture of cleaning agents is mixed into the water that is sprayed onto the house. After sitting for a few minutes it is then rinsed off. For moldy siding a mix of bleach is an excellent cleaner. For wood special detergents are needed that will not damage wood fibers. If you are just needing a general cleaning then an all purpose house wash mix will be used to remove the grime that has built up on your house over time. Most of these cleaners can be found at local home improvement or pressure washing stores. To get started you will need to find a local rental place and obtain the proper size unit. I suggest a quality brand such as a Karcher power washer. Since you will be using low pressure to clean your house a unit of around 3000-3500 psi will be more than enough. The only reason to have this much pressure is to reach the high eves of a second story house. How do you get low pressure out of 3000 psi ? You need to use a special tip on the wand, sometimes called a house wash tip. It has a large hole which creates a lower pressure stream but with more volume. This will bring the psi down to around 300 psi. To mix in the cleaning material the unit should have a ‘down streaming’ function. This is a small hose you put into a bucket of cleaning solution. When you start up the unit a vacuum is created that will draw up the solution and mix it with the water as it comes out the hose. This usually creates a mixture of around 5-1 or 7-1. You will need to read the cleaning solutions directions to be sure you are using the correct amount of solution. The best way to actually clean your house is to start at a corner. Slowly work your way across to the other end of the house. As you go spray the stream of water down at the bottom of the house and work your way up to the eves of the roof. Always work from the bottom up, this will reduce the chance for streaks to appear. Be sure to saturate every inch of the side you are working on. If you do not then you will have spots where the bleach and cleaner did not touch. Once you get to the end of the house you will need to pull the ‘down streaming’ hose out of the cleaning solution bucket and go back over the side of the house again, this time with only clean water coming out the hose. Thoroughly rinse the siding. You should now be done with that side of the house. Put the ‘down streaming’ house back into the solution bucket and begin the next side of the house. Start with the nozzle about 3 feet from the wall and work your way closer until you feel the spray is strong enough but not too strong. Never get closer than 12 inches from the siding or you may damage it; do not point it at windows and avoid aiming it upward, where it might drive water under the siding. Remember, this is extremely high pressure, so never point the nozzle at anyone and be sure to wear safety glasses. Also keep the wand, the water, and yourself away from any electrical wires or devices. Protect any plants, light fixtures, or other breakable objects around the house with plastic bags, duct tape, and drop cloths. Move obstacles and outdoor furniture away from the house. A pressure washing unit is no toy. Be sure to wear safety glasses and do not underestimate the power of water. Never point the wand at anyone at any time. Power washing is the best way to clean your home hands down. If you decide to buy your own unit check out a Husky pressure washer or other name brand. Cleaning your house with a pressure washer is not very hard and will result in a nice shiny house you will be proud of.

David Lee is a power washing contractor in Atlanta. For more information see PressureWashingKing. com

What You Want To Know About Steam Clean Pressure Washers

Seth — Thu, 02 Jul 2009 17:17:02 +0000

Pressure steam cleaners are machines that clean surfaces using steam or hot water. The steam and the pressure behind the machine provide a very efficient way of removing dust mites, allergens, mold, fungus, and bacteria. This is the preferred way of cleaning in such places as hospitals, restaurants, pharmacies, and hotels. In the traditional sense, steam cleaner pressure washers are composed of a boiler, a collecting tank, a hose and brushes. Hot water is sprayed under pressure on the surface being cleaned. The amount of pressure that you need or the flow rates are what will likely direct you to the machine that you will eventually purchase. The flow rate is the amount of water that you will be able to use to remove the debris. The pressure expresses how hard the water will approach the surface of what is being cleaned. When you are cleaning flat surfaces it is more important to have a high rate of flow as that will make it much easier to loosen, remove, and wash away the debris. When you are cleaning surfaces that are not flat or that might be vertical, pressure would be more likely what you would be interested in. These units have advanced quite nicely and are more affordable than you may think. There are various styles and accessories that are available for power steam cleaners. Steam cleaner pressure washers are available in gas powered or electric powered capabilities. Obviously the gas powered versions are more portable and less constricting which is convenient for outdoor work. They are also more likely to offer a longer life expectancy with less repairs needed. The electric powered steam pressure washers are not vulnerable to wet conditions and while they can be used outdoors they also can be used indoors as well. The gas powered steam cleaner pressure washers can not be used indoors as they omit carbon monoxide. Another benefit of the electric version is that it makes much less noise. Commercial pressure washers and industrial steam cleaner pressure washer’s offer much more industrial equipment than pressure washers designed for use in the home. Many commercial users use poor judgment when buying home pressure washer machines because they are much cheaper. The problem is that they will never last as they are unable to endure the industrial workloads. Steam cleaner pressure washers depend upon heating coils that reach temperatures past 300° F, and are much better than either cold or hot water pressure washers in regards to removing grease, dirt, concrete stains, food, chewing gum, unsightly graffiti, and numerous other types of debris. Stainless steel or heavy carbon heating coils are most reliable and also assist with creating the correct environment and ultra high temperatures that are needed. Another perk of steam cleaner pressure washers is that they do not rely on chemicals like cold water pressure washers do. The high steam pressure that is omitted is excellent to clean better than hot water and cold water pressure washers. The method of powering a pressure washer is every bit as important as the heating method.

Ultimate Washer has been the leading retailer since 2003 in pressure washer equipment and accessories with high ranking in the search engines (Google, Yahoo, Msn, Etc. ,). We are authorized distributors for several major manufacturers in the U. S. A. for products ranging from small parts to large custom build machinery. Currently we have relationships with about forty suppliers.

A Green Way to Clean

Seth — Thu, 02 Jul 2009 04:56:50 +0000

This is Bobs time to shine. Even in this credit crisis his branch is doing pretty good and the bosses are planning to come out and visit his location next month. It´s a real shame that some “Local Artists” have just decided to use his store front as their canvas. Sarah-Jane thinks she´s ready. She cleaned the carpet. She polished the silver. She even ironed the sheets. Deep down she knows though that it doesn´t really matter what the inside of her house looks like because when her Mother-In-Law arrives for her annual visit next week all she´s going to see is the moss and limescale out front. These two examples may seem unrelated but their solutions are very much connected because both problems can be fixed with help from the environmental cleaning experts at Desert Eagle Powerwash. Desert Eagle Powerwash offers an affordable, non-toxic and completely environmentally friendly way to clean and restore your property with their unique Pressure Cleaning Technology. It´s ideal for many purposes including: Brick, Stone & Concrete Restoration, Graffiti & Chewing Gum Removal, Moss & Mold Removal, Fire Damage, Marine, Rail & Tank Cleaning, Paint, Grease & Rust Removal. No job is too big or too small for Desert Eagle Powerwash and even though they´re based in Surprise they´re able to work anywhere in Arizona.

Updates:Bob called Desert Eagle Powerwash and his bosses were so impressed with his store that they gave him another one to look after too!Sarah-Jane also called and for the first time in 20 years her Mother-In-Law had nothing to pick at. She enjoyed her visit so much she decided to start visiting twice a year. Oh well, not every ending can be a happy one.